8.6mm/.338 345gr SUBSONIC Raptor - 50ct
8.6mm/.338 345gr SUBSONIC Raptor - 50ct
8.6mm/.338 345gr SUBSONIC Raptor - 50ct

Cutting Edge Bullets

8.6mm/.338 345gr SUBSONIC Raptor - 50ct

$105.99
SKU: FB 338 345 SS

50ct *This product is being replaced with the FB M.338 340 SS. See full product description for link. For best results, we recommend speeds 1020fps or slower. 8.6 SUBSONIC Raptor™. This bullet is designed to function at subsonic speeds and put game on the ground quickly and quietly. A minimum impact velocity of 800fps is required for the hollow point to function as intended. Instead of mushrooming, our subsonic Raptor bullet sheds 4 large blades after about 1-2" of penetration while the base continues.

DO NO PUSH THESE PROJECTILES OVER 1100FPS. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR FROM PUSHING THESE PROJECTILES TOO FAST.

Quantity:
Backorder Information
Pickup available at Cutting Edge Bullets Usually ready in 24 hours

8.6mm/.338 345gr SUBSONIC Raptor - 50ct

Cutting Edge Bullets

Pickup available, usually ready in 24 hours

6766 West Melrose Street
Boise ID 83709
United States

+12086094954

BACKORDER INFO

Find out current lead times on backordered items.

SHIPPING

Free shipping over $400
$12 flat rate to lower 48

TWIST RATES

Please check your twist rate to make sure you can stabilize this bullet.

50ct

*This product is being replaced with the FB M.338 340 SS
For best results, we recommend a velocity of 1020fps or slower. 
DO NO PUSH THESE PROJECTILES OVER 1100FPS. WE ARE NOT RESPONSIBLE FOR ANY DAMAGE THAT MAY OCCUR FROM PUSHING THESE PROJECTILES TOO FAST.

This bullet is designed to function at subsonic speeds and put game on the ground quickly and quietly. This makes it an excellent choice for 8.6 Subsonic rifles.

A minimum impact velocity of 800fps is required for the hollow point to function as intended.

Instead of mushrooming, our subsonic Raptor bullet sheds 4 large blades after about 1-2" of penetration while the base continues.

It is manufactured out of solid copper bar stock on a CNC Swiss style lathe.

The minimum required twist rate for this bullet is 1:7" or faster.

CLICK HERE FOR LOAD DATA

 

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Carl Reed
only one

As far as i know the 338 subsonic bullets produced by Cutting Edge Bullets are the only ones on the market that function at subsonic velocities, and thus can be used in subsonic cartridges for hunting and self defense. I am only just now able to build a 338 subsonic carbine because of this product release. A competitor was producing these for a short time (and they were brass, which i don't trust much, but then stopped. Thank you Cutting Edge!