CuttingEdgeBullets
.510 762gr SINGLE FEED MTAC (Match/Tactical) - 50ct
25ct
This bullet was designed for single shot loading in 50BMG rifles. This MTAC line is machined out of lead free solid copper bar stock on a CNC swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite™ band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
.510 762gr SINGLE FEED MTAC (Match/Tactical) - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This bullet was designed for single shot loading in 50BMG rifles.
This MTAC line is machined out of lead free solid copper bar stock on a CNC Swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.
Caliber: .510
Weight: 762 grains
Required Twist Rate: STANDARD
G1 Ballistic Coefficient: .952
G7 Ballistic Coefficient: .487
OAL: 2.381
Projection Length: 1.689
Min Impact Velocity Required for Expansion:
These are excellent projectiles that achieve consistent accuracy. I choose this weight for my light gun to balance the recoil. I will continue to use these projectiles.
Love these rounds !!!! Accurate … well manufactured
I first tried Cutting Edge Bullets in my 338 Lapua. I was shooting factory Hornady 285 gr ELDM which were ok, but with the 277 gr MTAC I was able to make consecutive hits at 1,400 yards. Which leads me to now, I upgraded my caliber size from the 338 Lapua to the 50 BMG. Got all my reloading components for this beast and did not second guess the choice of bullet. I have 10 rounds loaded up to start ladder testing followed by some fine tuning to make my 1,760 and 3,000 yard goals come true. These bullets look so amazing it’s a shame I have to shoot them.
8/18/2020
I first tried Cutting Edge Bullets in my 338 Lapua. I was shooting factory Hornady 285 gr ELDM which were ok, but with the 277 gr MTAC I was able to make consecutive hits at 1,400 yards. Which leads me to now, I upgraded my caliber size from the 338 Lapua to the 50 BMG. Got all my reloading components for this beast and did not second guess the choice of bullet. I have 10 rounds loaded up to start ladder testing followed by some fine tuning to make my 1,760 and 3,000 yard goals come true. These bullets look so amazing it’s a shame I have to shoot them.
