CuttingEdgeBullets
.510 750gr SINGLE FEED Lazer - Tipped Hollow Point - 50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. The Lazer line offers a high and consistent BC, making it the #1 choice for ELR match shooters everywhere.
If button below says "BACKORDER" instead of "ADD TO CART", product is on backorder
.510 750gr SINGLE FEED Lazer - Tipped Hollow Point - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. Because of our precise manufacturing process, we guarantee all of our bullets to be within 0.2 grain (for calibers .308 and under) and 0.4 grain (for calibers over .308) weight deviation between bullets in a given box.
The Lazer line offers a high and consistent BC, making it the #1 choice for ELR match shooters everywhere.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3 large petals will break off and radiate outward in a star pattern while the base continues through for even deeper penetration. Our Lazer line will expand down to 1400fps.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .510
Weight: 750gr
Required Twist Rate: STANDARD
G1 Ballistic Coefficient: TBD
G7 Ballistic Coefficient: TBD
OAL: 2.499"
Projection Length: 1.698"
Min Impact Velocity Required for Expansion: 1400fps
Customer Reviews
I have tried A-Max and Barnes solids. The Cutting Edge Lasers have become my favorite for long distance. They retain the most weight to drive through and the copper is pretty tough. I Molly coat them before loading. The Molly seems to keep my pressure signs under control with the loads I am using and helps my brass life. I have these 750 grain Lasers coming out at 2750 fps and they fly true for a very long way. At long distance I am using the same drop chart that I was with the A-Max rounds at 2750fps. There is not much difference, so I believe the BC is pretty close to that of tha A-Max. I believe the Laser is more aerodynamic but it is shorter than the A-Max. So I feel it balances out the BC. (It would be nice to have the BC published at some point to know what it is.) Being shorter than the A-Max it should have a slight bit less wind interference from a full 90 cross wind? Great projectiles, please continue to produce the 750 grain Lasers.
Unbelievably consistent weights and lengths. Haven’t shot them yet due to everything being hard to find, but I expect they will shoot as good as they look.
This is my first time using Cutting Edge bullets so far they are doing an excellent job!!
I highly recommend them for your Percision long distance shooting needs!!
