CuttingEdgeBullets
.510 660gr MTAC (Match/Tactical) - 50ct
50ct
This bullet was designed for magazine feeding in 50BMG rifles, specifically the Barrett M82A1 and M107A1. This MTAC line is machined out of lead free solid copper bar stock on a CNC swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite™ band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
.510 660gr MTAC (Match/Tactical) - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This bullet was designed for magazine feeding in 50BMG rifles, specifically the Barrett M82A1 and M107A1.
This MTAC line is machined out of lead free solid copper bar stock on a CNC Swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.
The required twist rate for this bullet is the Standard 1:15" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
This bullet is not designed to expand.
Caliber: .510
Weight: 660gr
Required Twist Rate: STANDARD
G1 Ballistic Coefficient:
G7 Ballistic Coefficient:
OAL: 2.067"
Projection Length: 1.404"
Min Impact Velocity Required for Expansion:
Customer Reviews
I am not a benchrest shooter but with these bullets I easily shoot under minute of angle, and they are as or more accurate that many other brands of bullets that cost more. I use WCC brass, a CCI primer and 205 grains of H50BMG with a cartridge overall length of 5.39 inches, which is a very conservative and safe load. You can buy these bullets with confidence.
Difficult to find exact load data. Based my loads off similar rounds. Have yet to collect data. Will post when I do. If anyone has good load data on these love to see it!
Have been shooting these out to 1k yards on 2 MOA steel target, getting consistent hits.
