

CuttingEdgeBullets
.416 525gr SINGLE FEED Lazer- MIXED LOT - 50ct
‼️ MIXED LOT – SCROLL DOWN TO READ DESCRIPTION ‼️
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. The Lazer line offers a high and consistant BC, making it the #1 choice for ELR match shooters everywhere.
*If ADD TO CART button is visible, product is NOT on backorder.
.416 525gr SINGLE FEED Lazer- MIXED LOT - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
50ct
MIXED LOT‼️
This item is a mixed lot item meaning the bullets in the box are not from the same run. When we run projectiles and we don’t have enough bullets to complete a 50ct box, the left over bullets are set aside. We used those bullets from different lots to make this 50ct box.
What this means: You more than likely will not notice a difference with these bullets. The largest difference may be the overall length due to differences in material density from lot to lot.
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. Because of our precise manufacturing process, we guarantee all of our bullets to be within 0.2 grain (for calibers .308 and under) and 0.4 grain (for calibers over .308) weight deviation between bullets in a given box. The Lazer line offers a high and consistent BC, making it the #1 choice for ELR match shooters everywhere.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3 large petals will break off and radiate outward in a star pattern while the base continues through for even deeper penetration. Our Lazer line will expand down to 1400fps.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")