CuttingEdgeBullets
.416 452gr SINGLE FEED MTAC (Match/Tactical) - 50ct
50ct
This SINGLE FEED MTAC bullet is machined out of lead free solid copper bar stock on a CNC swiss lathe. Just like the rest of our MTAC line, it is a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite™ band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
.416 452gr SINGLE FEED MTAC (Match/Tactical) - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This SINGLE FEED MTAC bullet is machined out of lead free solid copper bar stock on a CNC Swiss lathe. Just like the rest of our MTAC line, it is a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
The required twist rate for this bullet is 1:13" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .416
Weight: 452gr
Required Twist Rate: 1:13" or faster
G1 Ballistic Coefficient: .791
G7 Ballistic Coefficient: .406
OAL: 2.093"
Projection Length: 1.420"
Min Impact Velocity Required for Expansion:
Customer Reviews
I am going for a three mile shoot and purchased these for my 416 Barrett. After a few different loads I ended up with a fantastic grouping, I zeroed I the rifle at 500 yards and went to a one mile range to check my ballistic data, I hit right on the center and 500 yards, hit steel on the first shot at 1,000 and 1,245 yards and at one mile I was a minute high, I adjusted my ballistic calculations and hit the 10” steel 3” of center. I am very pleased with this bullet. Next will be two and three miles. Stay tuned
I used to get significant copper fouling with other bullets. Now it almost non exsistant.
These bullets are incredible, they make me look like a better marksman. My order was shipped and arrived at my house very quickly! Thank you Cutting Edge for these precision projectiles.
Love these high quality projectiles!
Amazing accuracy and consistency!
