.400 165gr Rifle Maximus-50ct
.400 165gr Rifle Maximus-50ct
.400 165gr Rifle Maximus-50ct

CuttingEdgeBullets

.400 165gr Rifle Maximus-50ct

$69.99
SKU: M.400 165 50CT

50ct

The new Rifle Maximus™ high BC bullet was designed for use in .40 cal rifles, specifically the 400 legend. These bullets were designed for that after 1-2" of penetration, 4 blades break off and radiate outward away from the main wound channel while the base continues through for even deeper penetration creating a massive amount of trauma.

Quantity:
Backorder Information
*If ADD TO CART button is visible, product is NOT on backorder.
Pickup available at Cutting Edge Bullets Usually ready in 24 hours

.400 165gr Rifle Maximus-50ct

Cutting Edge Bullets

Pickup available, usually ready in 24 hours

6766 West Melrose Street
Boise ID 83709
United States

+12086094954

BACKORDER INFO

Find out current lead times on backordered items.

SHIPPING

Free shipping over $400
$12 flat rate to lower 48

TWIST RATES

Please check your twist rate to make sure you can stabilize this bullet.

50ct

This is a hollow point hunting bullet with an exceptional BC and incredible terminal performance. After 2-3" of penetration, 4 blades break off and radiate outward in a star pattern while the base continues through for even deeper penetration. 

This bullet was designed to have the BC of our MTH/MTAC line with the terminal performance of our Raptor™ series.

Customer Reviews

Based on 14 reviews
71%
(10)
0%
(0)
21%
(3)
0%
(0)
7%
(1)
m
meat hunter
This is the SH*T

Is the CEB 165 Maximus accurate? Very much so, sub minute. Is it flat shooting? Absolutely. Three inches thigh at 100 yards,dead on at 200 yards. I’m sighted in 1 inch high at 100 yards , a mid broadside hold at 200 is spot on.The CEB 165 grain bullets are leaving the barrel at close to 3000 fps. Are the CEB bullets up to the job.You betcha. Very effective. No deer went farther than fifty yards.A couple of bang flops. A couple of chin hitting the ground before running a bit and piling up. I Plan on shooting some 300 yard targets to see what it does at that distance when I am getting around a bit better. Does the CEB bullet poke good size holes for blood trailing. See the pictures.(the high shot is on me) CEB claims the bullet tip breaks off into four pieces with the base remaining intact. I have no reason to doubt them. They work. On smaller deer a lower brisket heart shot impact is very destructive with not much identifiable in the jellied goo and skinning a bit dicey around the shoulders for fear of pulling the front half off from the back half.

We are so happy to hear about your positive experience! Thanks so much for sharing with us. Happy hunting!

J
Jerry Miller
So far so good

Loaded using H110. Chronoed at 2661. 1 moa at 100 yards out of a Ruger American Gen 2 predator. Hope they perform on deer this season.

J
Joe C
Pig Hunt

I used this bullet on a wild boar hunt. One shot the boar went down where he stood. 77grns by weight of blackthorn 209. Will use the same in Nov."24.

K
Kevin W

Awesome terminal performance. Took a very nice whitetail buck on my first outing with them. He was DRT. The sabots are some of the best I've ever used. They opened perfectly and are very consistent. I recovered over 30 from two different rifles between 10 and 12 feet from the muzzle. Glad I found them and purchased them. There was a problem with the delivery on my end and Cutting Edges customer service was fast and made sure I got my products. Couldn't be happier!

R
Ryan M

Was unable to get it to group out of a Cva Acura L-RX tried 2 different sabots and the blue one from cutting edge was to loose in the barrel so it didn’t seal the gas and had erratic velocities and 4 foot groups at 100 yards, mmp sabots were a little bit better, only bullet from cutting edge I’ve had a problem with.

It sounds like your barrel is a bit oversized. There is a known inconsistency with muzzleloader barrels across the board. Sometimes a lubed patch on the base of the sabot will help to seal the barrel and make up for that void. If you have the means to pin your barrel and see what the actual diameter is, that may help to narrow down what is going on.

123