CuttingEdgeBullets
.375 352gr SINGLE FEED MTAC (Match/Tactical) - 50ct
50ct
Our MTAC line is machined out of lead free solid copper bar stock on a CNC swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite™ band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
.375 352gr SINGLE FEED MTAC (Match/Tactical) - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This bullet was designed for large caliber .375 rifles.
Our MTAC line is machined out of lead free solid copper bar stock on a CNC Swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.
The required twist rate for this bullet is 1:11" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .375
Weight: 352 grains
Required Twist Rate: 1:11" or faster
G1 Ballistic Coefficient: .797
G7 Ballistic Coefficient: .408 (A.B.)
OAL: 2.002"
Projection Length: 1.402"
Min Impact Velocity Required for Expansion:
Customer Reviews
The factory ammo I bought uses Current Edge 352 grain bullets. I was able to hand load the same bullet and get a bit more velocity out of my Desert Tech HTI 375 Cheytac. This is the final test target. The first fouling shot with factory ammo was high left, but the second shot was right where it should’ve been. Without cleaning the rifle, I shot the next three groups. I used load data I received from Current Edge. Excellent results, which were superior to the $15/round factory ammo.
One ragged hole at 600, it doesn't get better than these in my DT HTI!
Excellent Bullets and excellent service.Thanks Bryan Litz
Of all the bullets and weights I’ve tested this 352 MTAC is the go to projectile. Extensive test in the lab and field make this my choice for ELR Competition
1/2/2020
