CuttingEdgeBullets
.308 180gr Lazer-Tipped Hollow Point - 50ct
50ct
Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe.
.308 180gr Lazer-Tipped Hollow Point - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. Because of our precise manufacturing process, we guarantee all of our bullets to be within 0.2 grain (for calibers .308 and under) and 0.4 grain (for calibers over .308) weight deviation between bullets in a given box.
The LAZER line can be used at all ELR ranges.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3 large petals will break off and radiate outward in a star pattern while the base continues through for even deeper penetration. Our Lazer line will function down to 1400fps.
Required twist rate for this bullet is 1:10" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .308
Weight: 180 grains
Required Twist Rate: 1:10" or faster
G1 Ballistic Coefficient: .525
G7 Ballistic Coefficient: .269
OAL: 1.537"
Projection Length: .750"
Min Impact Velocity Required for Expansion: 1400fps
Customer Reviews
Cutting Edge bullets are the most accurate and devastating bullet I have ever shot. The .308gr Lazer-Tipped Gen2 is matched perfectly with my 300 Weatherby. Load development and finding an accuracy node was much easier than other bullet. All my hunting rounds (all calibers) are loaded with Cutting Edge bullets. You want the best, these are what you are looking for. The bullets are high quality and customer support is the best you’ll find!
Somewhat of a learning curve on these. The raised shoulder will cause an ogive contact of your rifle chamber before your typical contour ones. Nothing a little adjustment of your dies and press can't solve, but might mess with you math. Similarly, because it offers more "hop" due to higher muzzle velocities achieved with greater chamber seal, start lower on the powder gradients and work your way up. I had a few fliers in trying to recreate DOPE on a rifle, mainly because of the ogive contact, and causing my bolt to bind. Still, would recommend as they have reputable and repeatable muzzle velocities, and the fact that they are by demand built, as opposed to gauging the current market availability. Have not used in hunting yet, so cannot vouche for wound channel or expansion. However, on steel at 1,000, these made a deeper dent in .25 inch thick AR500 than your Nosler or Factory Second bullets (Both of which are still great). Definitely worth the price to at least experiment with, if your curious.
Great product, shot amule deer at 400 yards full pass through with the base and pedals, one heck of a blood trail he didn’t go far!
