CuttingEdgeBullets
.308 110gr Flat Base Copper Raptor - 50ct
50ct
This bullet was specifically designed for the 30-30 cartridge and is manufactured out of solid copper bar stock on a CNC Swiss style lathe. Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
.308 110gr Flat Base Copper Raptor - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This bullet was specifically designed for the 30-30 cartridge and is manufactured out of solid copper bar stock on a CNC Swiss style lathe.
*PLEASE NOTE: Not for use in Pre 64 Winchester Model 94 rifles OR Mossberg 30-30 rifles
Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
We also have tips that can be used in these bullets for those not using a tubular magazine. Use of tips in tubular magazine will cause primer to ignite. These bullets are not recommended for use in rifles with a twist faster than 1-6".