copper hollow point rifle bullet
.257 115gr MTH (Match/Tactical/Hunting) - 50ct
.257 115gr MTH (Match/Tactical/Hunting) - 50ct

CuttingEdgeBullets

.257 115gr MTH (Match/Tactical/Hunting) - 50ct

$55.99
SKU: MTH 257 115

50ct

Our MTH line is machined out of lead free solid copper bar stock on a CNC lathe. These are a high BC, expanding bullet designed for hunting at all ranges.

Quantity:
Pickup available at Cutting Edge Bullets Usually ready in 24 hours

.257 115gr MTH (Match/Tactical/Hunting) - 50ct

Cutting Edge Bullets

Pickup available, usually ready in 24 hours

6766 West Melrose Street
Boise ID 83709
United States

+12086094954

BACKORDER INFO

Find out current lead times on backordered items.

SHIPPING

Free shipping over $400
$12 flat rate to lower 48

TWIST RATES

Please check your twist rate to make sure you can stabilize this bullet.

50ct

Our MTH® line is machined out of lead free solid copper bar stock on a CNC lathe. These are a high BC, expanding bullet designed for hunting at all ranges.

A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.

These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3-4 petals will break off and radiate outward from the main wound channel about 2-3" creating massive trauma. They will expand down to 1600fps.

The required twist rate for this bullet is 1:8" or faster.

Customer Reviews

Based on 8 reviews
63%
(5)
0%
(0)
38%
(3)
0%
(0)
0%
(0)
J
James K

You customer service is stellar!!! I had to return these because my twist rate was too slow and I have never had such responsive and personal service when returning anything to anywhere. I did buy others and will continue to be a loyal Cutting Edge customer!

J
James K

7/11/2020

J
James K

You customer service is stellar!!! I had to return these because my twist rate was too slow and I have never had such responsive and personal service when returning anything to anywhere. I did buy others and will continue to be a loyal Cutting Edge customer!

L
Larry A

Had high hopes, but they didn't shoot well. Shot indoor 100 yd range from sandbagged position doing load testing. Gun is a 6.5CM with Stiller action, Benchmark Barrel #6 contour, 1:8 twist, bedded in A3/A5 stock. Used Redding competition dies, trimmed cases to specs, checked run-out, etc. Loaded several bullets, using H4350, IMR4350, RL 15 & RL 17 & Varget with two powder charges each powder/bullet. Best groups: Hornady 147's shot .208", Hornady 143 ELDX shot .312", Nosler 140 RDF shot .418", Berger 140 shot .715" and the Cutting Edge didn't get inside 1.5". stringing horizontally primarily. I followed seating instructions. Thoughts?

Larry,
You say you're shooting a 6.5 Creedmoor but the bullet you're reviewing is a .257Cal. Is it possible you are reviewing the wrong bullet?

L
Larry A

12/31/2019

Larry,
You say you're shooting a 6.5 Creedmoor but the bullet you're reviewing is a .257Cal. Is it possible you are reviewing the wrong bullet?

12