CuttingEdgeBullets
.264/6.5mm 110gr ER (Extended Range) Raptor - 50ct
50ct
The ER (Extended Range) Raptor™ is a tipped hollow point design and is intended for long-range hunting out to 600yds. Instead of mushrooming, our Raptor bullets are all designed to shed 6 blades after 1-2" of penetration while the base continues for even deeper penetration.
.264/6.5mm 110gr ER (Extended Range) Raptor - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
The ER (Extended Range) Raptor™ is a tipped hollow point design and is intended for long-range hunting out to 600yds. Instead of mushrooming, our Raptor bullets are all designed to shed 6 blades after 1-2" of penetration while the base continues for even deeper penetration.
A minimum of 1500fps impact velocity is required for the hollow point to function as intended.
This bullet has a required twist rate of 1:8" or faster. These bullets are not recommended for use in rifles with a twist faster than 1-6".
These bullets come with Raptor™ tips installed.
Caliber: .264/6.5mm
Weight: 110 grains
Required Twist Rate: 1:8" or faster
G1 Ballistic Coefficient: .400
G7 Ballistic Coefficient:
OAL: 1.406"
Projection Length: .900"
Min Impact Velocity Required for Expansion: 1500fps
Customer Reviews
Shot a good sized boar straight on in the head and it exited just below the front leg. So ya, the bullet will penetrate. I’ll probably be switching most of my rifles to CEB.
Very good quality. Will buy again
High quality copper solids
I was having trouble finding a load that my 6.5mm-300 weatherby mag would like. Then I found this bullet. First five shot group with this bullet got me a .8 inch group at 100 yards. I will play with it to make it better in the future but as it is the hogs dont like it.
