CuttingEdgeBullets
.375 400gr SINGLE FEED Lazer-Tipped Hollow Point - 50ct
50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe.
.375 400gr SINGLE FEED Lazer-Tipped Hollow Point - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. Because of our precise manufacturing process, we guarantee all of our bullets to be within 0.2 grain (for calibers .308 and under) and 0.4 grain (for calibers over .308) weight deviation between bullets in a given box.
The LAZER line can be used at all ELR ranges.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3 large petals will break off and radiate outward in a star pattern while the base continues through for even deeper penetration. Our Lazer line will function down to 1400fps.
Required twist rate for this bullet is 1:9" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
International? Click HERE to find your local dealer!
Caliber: .375
Weight: 400 grains
Required Twist Rate: 1:9" or faster
G1 Ballistic Coefficient: .889 (A.B.)
G7 Ballistic Coefficient: .456 (A.B.)
OAL: 2.287"
Projection Length: 1.691"
Min Impact Velocity Required for Expansion: 1400fps
I have always had good results with all things cutting edge!!!
Got those loaded in my 375 Cheytac. Went to Spearpoint Ranch to an ELR class with Manners. Shot out to 2900 with impacts all of the way. Great bullet!! Only one I will run my gun!!
My .375 Cheytac loves your bullets, and so do I. I don’t have to weigh them, or measure them, or point them, or trim them or sort them. They’re good right out of the box and consistent from lot to lot. Groups < 1.5” @1000 yds are common with no wind and when I am at my best. They shoot better than I do, and when I miss my mark, I’m confident it’s neither your bullets nor my rifle. The tape on my gong in the photo is 2”…When I have everything right, they shoot through the same hole at 100 yds. It’s not fair really to give you all the credit….My gunsmith was Robert Vestal;Joe Updike designed and built the chassis; and John Baker supplied my structured barrel.
Can’t say enough about this projectile. Consistency and accuracy. What more do you want?
Shoot awesome in my 375 EnABELR. Looking forward to getting them out to distance when the weather allows.
