CuttingEdgeBullets
.375 235gr ER (Extended Range) RAPTOR - 50ct
50ct
The ER (Extended Range) Raptor is a tipped hollow point design and is intended for long-range hunting out to 600yds. Instead of mushrooming, our RAPTOR™ bullets are all designed to shed 6 blades after 1-2" of penetration while the base continues for even deeper penetration.
*If ADD TO CART button is visible, product is NOT on backorder.
.375 235gr ER (Extended Range) RAPTOR - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
The ER (Extended Range) Raptor is a tipped hollow point design and is intended for long-range hunting out to 600yds. Instead of mushrooming, our RAPTOR™ bullets are all designed to shed 6 blades after 1-2" of penetration while the base continues for even deeper penetration.
A minimum of 1500fps impact velocity is required for the hollow point to function as intended.
This bullet has a required twist rate of 1:12" or faster. These bullets are not recommended for use in rifles with a twist faster than 1-6".
These bullets come with Raptor™ tips installed.
Caliber: .375
Weight: 235 grains
Required Twist Rate: 1:12" or faster
G1 Ballistic Coefficient: .337
G7 Ballistic Coefficient:
OAL: 1.519"
Projection Length: .730"
Min Impact Velocity Required for Expansion: 1500fps
Customer Reviews
These bullets are very accurate with the powder I am using. Excellent trajectory, as expected.
American bison and cape Buffalo dropped to one shot each from 450/400 Nitro Express. Cow elk also with a 7x57. My go to bullets.
I used the 235 Raptor ER in .375 H&H quite effectively on Plains Game in SA May, 2023. Knocked a Burchell’s Zebra stallion off his feet at about 70 yds after a right front shoulder shot. Blood streamed from the entry hole like from a small hose and his organs were liquified and devastated. Dropped a large Nyala at 30 yards to the same effect as well as an Impala at about 25 yds. These are not meat-saving bullets but none exited any of the animals I shot so the hides were in great shape with only caliber-size entry holes. Going into the hunt, on-game performance was personally unknown. Post-hunt I’d use them again if I didn’t care about saving meat. Will test on whitetail at longer distances to see how they do in the meat-saving department. Easy to load, highly accurate and puts ‘em down.
Still waiting for delivery after 4 weeks.
We apologize for the wait. Our current backorder lead time is around 12 weeks as listed on our website. The ER L235 are due to our warehouse around 3/14/22. Once we receive them we will inspect them and ship them right back out. We will upload tracking information to your online account. We greatly appreciate your patience!
I loaded this bullet for my 375 ruger specifically for deer hunting in Missouri. It’s hard to find a 375 caliber bullet that is not a blunt nose and was trying to find a bullet that I could consistently get accuracy and good velocity at 300 to 400 yards if needed . This bullet design is the only one I found in this light weight that I believed would work for what I needed .My load using Varget gives me same hole accuracy at 100 yards. I shot a 240 pound buck and 180 pound doe with this and neither one took a step afterwards. The buck I Dissected because it was an angled shot I hate him just behind the ribs on his left side and it came out just in front of his shoulder on the right,The base of this bullet completely passed through the animal with no problem and the pedals separated as advertised and found three petals had gone through his lungs. This is definitely a bullet that is worth the money. I will be using these for as long as they are available in my 375 Rager
