CuttingEdgeBullets
.338 267gr SINGLE FEED MTAC (Match/Tactical) - 50ct
50ct
Our MTAC line is machined out of lead free solid copper bar stock on a CNC swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite™ band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite™ band also decreases copper fouling which is typically associated with mono metal bullets.
.338 267gr SINGLE FEED MTAC (Match/Tactical) - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
Our MTAC line is machined out of lead free solid copper bar stock on a CNC Swiss lathe. These are a high BC, solid bullet designed exclusively for target use at all ranges. A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.
The required twist rate for this bullet is 1:10" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .338
Weight: 267 grains
Required Twist Rate: 1:10" or faster
G1 Ballistic Coefficient: .827
G7 Ballistic Coefficient: .418
OAL: 1.831"
Projection Length: 1.246"
Min Impact Velocity Required for Expansion:
Customer Reviews
I got these because the bc is almost the same as the 300 grain Lasers. I still haven’t got to shoot them but they look great and I have faith they will shoot just as well as any other bullet out there if not better.
Still working on load tuning, but initial testing is promising. These bullets are beautifully machined and the most consistent I have ever used. I’m definitely able to push them faster without excessive pressure compared to other bullets of similar weight.
