CuttingEdgeBullets
.308 110gr Flat Base Copper Raptor
50ct
This bullet was specifically designed for the 30-30 cartridge and is manufactured out of solid copper bar stock on a CNC Swiss style lathe. Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
.308 110gr Flat Base Copper Raptor
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
50ct
This bullet was specifically designed for the 30-30 cartridge and is manufactured out of solid copper bar stock on a CNC Swiss style lathe.
Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
We also have tips that can be used in these bullets for those not using a tubular magazine. Use of tips in tubular magazine will cause primer to ignite.