CuttingEdgeBullets
.308 100gr Flat Base Raptor - 50ct
50ct
This bullet was designed with crimping grooves placed precisely for 300 Whisper, 300 Blackout, 300 WT as well as .308 Winchester. These bullets are manufactured out of solid brass bar stock on a CNC Swiss style lathe. Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
.308 100gr Flat Base Raptor - 50ct
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This bullet was designed with crimping grooves placed precisely for 300 Whisper, 300 Blackout, 300 WT as well as .308 Winchester.
These come with Raptor Tips™ already installed.
The Flat Base Raptors are manufactured out of solid brass bar stock on a CNC Swiss style lathe.
Instead of mushrooming, these hollow points are designed so that after 1-2" of penetration, 6 blades break off and radiate outward in a start pattern while the base continues on for even deeper penetration.
The required twist rate for this bullet is 1:12" or faster. These bullets are not recommended for use in rifles with a twist faster than 1-6".
A minimum impact velocity of 1500fps is required for the hollow point to function as intended.
