CuttingEdgeBullets
.375 425gr SINGLE FEED Lazer-Tipped Hollow Point
50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe.
.375 425gr SINGLE FEED Lazer-Tipped Hollow Point
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This is a SINGLE FEED bullet. Our Lazer line is a high BC, tipped hollow point hunting bullet designed for excellent long range accuracy and devastating terminal performance. These bullets are all manufactured out of lead-free, solid copper bar stock on a CNC Swiss style lathe. Because of our precise manufacturing process, we guarantee all of our bullets to be within 0.2 grain (for calibers .308 and under) and 0.4 grain (for calibers over .308) weight deviation between bullets in a given box.
The LAZER line can be used at all ELR ranges.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3 large petals will break off and radiate outward in a star pattern while the base continues through for even deeper penetration. Our Lazer line will expand down to 1200fps.
Required twist rate for this bullet is 1:8" or faster.
*If shooting through transonic, a twist rate increase of 1 inch is recommended (ex: 1:9" instead of 1:10")
Caliber: .375
Weight: 425 grains
Required Twist Rate: 1:8" or faster
G1 Ballistic Coefficient: .921
G7 Ballistic Coefficient: .471 (A.B.)
OAL: 2.393"
Projection Length: 1.797"
Min Impact Velocity Required for Expansion: 1200fps
Customer Reviews
Still doing load development, but so far they are working well in my 375 EnABELR. Got the speeds I’m looking for, just need to fine tune them and hopefully I’ll have them shooting well under 1/2 MOA.
Hard to give total picture of performance. I haven't a target longer than 1000 yds. For 1000 yds I hold a 4-5 group which isn't too bad with 9 o'clock 7mph going on.
