CuttingEdgeBullets
.264/6.5mm 140gr SINGLE FEED MTH (Match/Tactical/Hunting)
This is a SINGLE FEED bullet. Our MTH line is machined out of lead free solid copper bar stock on a CNC lathe. These are a high BC, expanding bullet designed for hunting at all ranges.
.264/6.5mm 140gr SINGLE FEED MTH (Match/Tactical/Hunting)
Cutting Edge Bullets
6766 West Melrose Street
Boise ID 83709
United States
BACKORDER INFO
Find out current lead times on backordered items.
SHIPPING
Free shipping over $400
$12 flat rate to lower 48
TWIST RATES
Please check your twist rate to make sure you can stabilize this bullet.
50ct
This is a SINGLE FEED bullet. Our MTH® line is machined out of lead free solid copper bar stock on a CNC lathe. These are a high BC, expanding bullet designed for hunting at all ranges.
A unique feature of this bullet is our patented SealTite® band which is a band slightly larger than caliber diameter around the bullet which was designed to eliminate fliers by preventing gas blow-by. The SealTite® band also decreases copper fouling which is typically associated with mono metal bullets.
These bullets do not mushroom, but instead, fracture. After 1-2" of penetration, 3-4 petals will break off and radiate outward from the main wound channel about 2-3" creating massive trauma. They will expand down to 1600fps.
The required twist rate for this bullet is 1:6.5" or faster.
Caliber: .264/6.5mm
Weight: 140 grains
Required Twist Rate: 1:6.5" or faster
G1 Ballistic Coefficient: .568
G7 Ballistic Coefficient: .291
OAL: 1.501"
Projection Length: 1.056"
Min Impact Velocity Required for Expansion: 1700fps
Customer Reviews
I am extremely happy with all of the Cutting Edge Bullets I use. My 7mm Practical and 280 Remington
both consistently Shoot sub 1/2 MOA groups. I am particularly pleased with the results I am getting from
my 6.5 PRC. I am using 6.5 Single Feed MTH bullets. It consistently shoots 1/3 MOA groups, and the
last time out I shot a .165” group. Although I built this rifle as a hunting rifle, I frequently use it in long
range shoots, and I am very confident engaging the 1200 yd target with it. With Cutting Edge bullets, I
expect all of my hunting rifles to shoot sub ½ MOA groups.
8/7/2020
I am extremely happy with all of the Cutting Edge Bullets I use. My 7mm Practical and 280 Remington
both consistently Shoot sub 1/2 MOA groups. I am particularly pleased with the results I am getting from
my 6.5 PRC. I am using 6.5 Single Feed MTH bullets. It consistently shoots 1/3 MOA groups, and the
last time out I shot a .165” group. Although I built this rifle as a hunting rifle, I frequently use it in long
range shoots, and I am very confident engaging the 1200 yd target with it. With Cutting Edge bullets, I
expect all of my hunting rifles to shoot sub ½ MOA groups.
